Ermeto Fittings

Run Tee

Round-SW

Pipe Plug

Air header - Bar Stock

Air Header - Pipe Line

Female Tee (Round-SW)

Syphon - PL X M Type

Syphon - 'U' Type

Syphon - Pig Tail Type

Syphon - M X F Type

Air Filter Regulator

Needle Valve - OD X OD Type

Note :

1. Working Pressure 9000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	1
3	GLAND RETAINER	SS 316	1
4	GLAND SEAL	PTFE	2
5	CHECK NUT	SS 316	1
6	SPINDLE	SS 316	1
7	TRIM	SS 316	1
8	HANDLE	SS 304	1
9	WASHER	SS 304	1
10	LOCK PIN	SS 304	1
11	CAP	PVC	1

Needle valve - M X M Type

Note :

1. Working Pressure 9000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	1
3	GLAND RETAINER	SS 316	1
4	GLAND SEAL	PTFE	2
5	CHECK NUT	SS 316	1
6	SPINDLE	SS 316	1
7	TRIM	SS 316	1
8	HANDLE	SS 304	1
9	WASHER	SS 304	1
10	LOCK PIN	SS 304	1
11	CAP	PVC	1

Needle Valve - F X F Type with Drain

Note :

1. Working Pressure 9000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	1
3	GLAND RETAINER	SS 316	1
4	GLAND SEAL	PTFE	2
5	CHECK NUT	SS 316	1
6	SPINDLE	SS 316	1
7	TRIM	SS 316	1
8	HANDLE	SS 304	1
9	WASHER	SS 304	1
10	LOCK PIN	SS 304	1
11	CAP	PVC	1

Needle Valve - M X F Type

Note :

1. Working Pressure 9000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	1
3	GLAND RETAINER	SS 316	1
4	GLAND SEAL	PTFE	2
5	CHECK NUT	SS 316	1
6	SPINDLE	SS 316	1
7	TRIM	SS 316	1
8	HANDLE	SS 304	1
9	WASHER	SS 304	1
10	LOCK PIN	SS 304	1
11	CAP	PVC	1

Needle Valve - F X F Type

Note :

1. Working Pressure 9000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	1
3	GLAND RETAINER	SS 316	1
4	GLAND SEAL	PTFE	2
5	CHECK NUT	SS 316	1
6	SPINDLE	SS 316	1
7	TRIM	SS 316	1
8	HANDLE	SS 304	1
9	WASHER	SS 304	1
10	LOCK PIN	SS 304	1
11	CAP	PVC	1

Nylon Insert Leak Lock

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Combination Lube Adaptor

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Safe Vent Coupler

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Nut

Giant Button Head Coupler

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Pressure Relief Tool

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Grease Gun Lube Adaptor

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Free Flow Type - with Giant Button Head

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Standard Type - with Giant Button Head

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Body Grease Fittings (Free Flow Type)

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Body Grease Fittings (Standard Type)

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Packing Injection (Floating Ball)

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Packing Injection (Free Flow)

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Body Vent (Socket Hex Head)

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Body Vent (Standard Hex Head)

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Multi Lock Seal

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Double Ferrule

Combination Lubricant (Double Ball)

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Combination Lubricant (Single Ball)

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Internal Check Valve (Metal Seat)

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Internal Check Valve (Soft Seat)

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Giant Button Head (Single Ball)

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Giant Button Head (Double Ball)

Testing Pressure :

1. Hydrostatic Pressure : 462 Kg/cm2 (10000PSI)
2. Pneumatic Pressure : 6.0 Kg/cm2 (85 PSI)

Panel Mounting Type

Note :

1. Working Pressure 9000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	1
3	GLAND RETAINER	SS 316	1
4	GLAND SEAL	PTFE	2
5	CHECK NUT	SS 316	1
6	SPINDLE	SS 316	1
7	TRIM	SS 316	1
8	HANDLE	SS 304	1
9	WASHER	SS 304	1
10	LOCK PIN	SS 304	1
11	DUST CAP	PVC	1

Male Connector

Four Port - Condensate Pot

Three Port - Condensate Pot

Hose Male Adaptor

Single Check QRC

Hose Female Adaptor

Tube Plug

Tube Cap

Male Run Tee

Male Branch Tee

Equal Tee

Union Elbow

Male Elbow

Female Elbow

Equal Union Cross

Bulkhead Union

Unequal Union (Reducing)

Equal Union

Bulkhead Male Connector

Bulkhead Female Connector

Female Connector

Needle Valve - OD X OD (Angle Type)

Note :

1. Working Pressure 9000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	3
3	GLAND RETAINER	SS 316	3
4	GLAND SEAL	PTFE	6
5	CHECK NUT	SS 316	3
6	SPINDLE	SS 316	3
7	TRIM	SS 316	3
8	HANDLE	SS 304	3
9	WASHER	SS 304	3
10	LOCK PIN	SS 304	3
11	DUST CAP	PVC	3

Needle Valve - F X F Type (Hex Body)

Note :

1. Working Pressure 9000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	3
3	GLAND RETAINER	SS 316	3
4	GLAND SEAL	PTFE	6
5	CHECK NUT	SS 316	3
6	SPINDLE	SS 316	3
7	TRIM	SS 316	3
8	HANDLE	SS 304	3
9	WASHER	SS 304	3
10	LOCK PIN	SS 304	3
11	DUST CAP	PVC	3

Needle Valve - M X F Type (Hex Body)

Note :

1. Working Pressure 9000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	3
3	GLAND RETAINER	SS 316	3
4	GLAND SEAL	PTFE	6
5	CHECK NUT	SS 316	3
6	SPINDLE	SS 316	3
7	TRIM	SS 316	3
8	HANDLE	SS 304	3
9	WASHER	SS 304	3
10	LOCK PIN	SS 304	3
11	DUST CAP	PVC	3

Monoflange - Double Block & Bleed(Bonnet Type)

Note :

1. Working Pressure 6000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	3
3	GLAND RETAINER	SS 316	3
4	GLAND SEAL	PTFE	6
5	CHECK NUT	SS 316	3
6	SPINDLE	SS 316	3
7	TRIM	SS 316	3
8	HANDLE	SS 304	3
9	WASHER	SS 304	3
10	LOCK PIN	SS 304	3
11	DUST CAP	PVC	3
12	DRAIN PLUG 1/4″ NPT(M)	SS 316	2

Monoflange - Single Block & Bleed Type

Note :

1. Working Pressure 6000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	3
3	GLAND RETAINER	SS 316	3
4	GLAND SEAL	PTFE	6
5	CHECK NUT	SS 316	3
6	SPINDLE	SS 316	3
7	TRIM	SS 316	3
8	HANDLE	SS 304	3
9	WASHER	SS 304	3
10	LOCK PIN	SS 304	3
11	DUST CAP	PVC	3
12	DRAIN PLUG 1/4″ NPT(M)	SS 316	2

5 Way Coplanar Type

Note :

1. Working Pressure 6000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	5
3	GLAND RETAINER	SS 316	5
4	GLAND SEAL	PTFE	10
5	CHECK NUT	SS 316	5
6	SPINDLE	SS 316	5
7	TRIM	SS 316	5
8	HANDLE	SS 304	5
9	WASHER	SS 304	5
10	LOCK PIN	SS 304	5
11	DUST CAP	PVC	5

3 Way Coplanar Type with Drain

Note :

1. Working Pressure 6000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	3
3	GLAND RETAINER	SS 316	3
4	GLAND SEAL	PTFE	6
5	CHECK NUT	SS 316	3
6	SPINDLE	SS 316	3
7	TRIM	SS 316	3
8	HANDLE	SS 304	3
9	WASHER	SS 304	3
10	LOCK PIN	SS 304	3
11	DUST CAP	PVC	3
12	DRAIN PLUG 1/4″ NPT(M)	SS 316	2

3 Way Coplanar Type

Note :

1. Working Pressure 6000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	3
3	GLAND RETAINER	SS 316	3
4	GLAND SEAL	PTFE	6
5	CHECK NUT	SS 316	3
6	SPINDLE	SS 316	3
7	TRIM	SS 316	3
8	HANDLE	SS 304	3
9	WASHER	SS 304	3
10	LOCK PIN	SS 304	3
11	DUST CAP	PVC	3

5 Way 'H' Type (Integral Mounting)

Note :

1. Working Pressure 6000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	3
3	GLAND RETAINER	SS 316	3
4	GLAND SEAL	PTFE	6
5	CHECK NUT	SS 316	3
6	SPINDLE	SS 316	3
7	TRIM	SS 316	3
8	HANDLE	SS 304	3
9	WASHER	SS 304	3
10	LOCK PIN	SS 304	3
11	DUST CAP	PVC	3

3 Way 'H' Type (Integral Mounting)

Note :

1. Working Pressure 6000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	3
3	GLAND RETAINER	SS 316	3
4	GLAND SEAL	PTFE	6
5	CHECK NUT	SS 316	3
6	SPINDLE	SS 316	3
7	TRIM	SS 316	3
8	HANDLE	SS 304	3
9	WASHER	SS 304	3
10	LOCK PIN	SS 304	3
11	DUST CAP	PVC	3

2 Way - Gauge Type (F) X (F)

Note :

1. Working Pressure 6000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	2
3	GLAND RETAINER	SS 316	2
4	GLAND SEAL	PTEF	4
5	CHECK NUT	SS 316	2
6	SPINDLE	SS 316	2
7	TRIM	SS 316	2
8	HANDLE	SS 304	2
9	WASHER	SS 304	2
10	LOCK PIN	SS 304	2
11	DUST CAP	PCV	2
12	DRAIN PLUG 1/4″ NPT(M)	SS 316	1

5 Way 'T' Type (Integral Mounting)

Note :

1. Working Pressure 9000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	5
3	GLAND RETAINER	SS 316	5
4	GLAND SEAL	PTFE	10
5	CHECK NUT	SS 316	5
6	SPINDLE	SS 316	5
7	TRIM	SS 316	5
8	HANDLE	SS 304	5
9	WASHER	SS 304	5
10	LOCK PIN	SS 304	5
11	DUST CAP	PVC	5
12	DRAIN PLUG 1/4″ NPT(M)	SS 316	2

5 Way 'F' Type (Separate Mounting)

Note :

1. Working Pressure 9000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	5
3	GLAND RETAINER	SS 316	5
4	GLAND SEAL	PTFE	10
5	CHECK NUT	SS 316	5
6	SPINDLE	SS 316	5
7	TRIM	SS 316	5
8	HANDLE	SS 304	5
9	WASHER	SS 304	5
10	LOCK PIN	SS 304	5
11	DUST CAP	PVC	5
12	DRAIN PLUG 1/4″ NPT(M)	SS 316	2

3 Way 'T' Type with Drain (Integral Mounting)

Note :

1. Working Pressure 6000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	3
3	GLAND RETAINER	SS 316	3
4	GLAND SEAL	PTFE	6
5	CHECK NUT	SS 316	3
6	SPINDLE	SS 316	3
7	TRIM	SS 316	3
8	HANDLE	SS 304	3
9	WASHER	SS 304	3
10	LOCK PIN	SS 304	3
11	DUST CAP	PVC	3
12	DRAIN PLUG 1/4″ NPT(M)	SS 316	2

3 Way 'T' Type (Integral Mounting)

Note :

1. Working Pressure 6000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	3
3	GLAND RETAINER	SS 316	3
4	GLAND SEAL	PTFE	6
5	CHECK NUT	SS 316	3
6	SPINDLE	SS 316	3
7	TRIM	SS 316	3
8	HANDLE	SS 304	3
9	WASHER	SS 304	3
10	LOCK PIN	SS 304	3
11	DUST CAP	PVC	3

3 Way 'F' Type (Separate Mounting)

Note :

1. Working Pressure 9000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	3
3	GLAND RETAINER	SS 316	3
4	GLAND SEAL	PTFE	6
5	CHECK NUT	SS 316	3
6	SPINDLE	SS 316	3
7	TRIM	SS 316	3
8	HANDLE	SS 304	3
9	WASHER	SS 304	3
10	LOCK PIN	SS 304	3
11	DUST CAP	PVC	3

3 Way 'F' Type with Drain (Separate Mounting)

Note :

1. Working Pressure 9000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	3
3	GLAND RETAINER	SS 316	3
4	GLAND SEAL	PTFE	6
5	CHECK NUT	SS 316	3
6	SPINDLE	SS 316	3
7	TRIM	SS 316	3
8	HANDLE	SS 304	3
9	WASHER	SS 304	3
10	LOCK PIN	SS 304	3
11	DUST CAP	PVC	3
12	DRAIN PLUG 1/4″ NPT(M)	SS 316	2

2 Way Manifold – ‘T’ Type

Note :

1. Working Pressure 6000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	2
3	GLAND RETAINER	SS 316	2
4	GLAND SEAL	PTEF	4
5	CHECK NUT	SS 316	2
6	SPINDLE	SS 316	2
7	TRIM	SS 316	2
8	HANDLE	SS 304	2
9	WASHER	SS 304	2
10	LOCK PIN	SS 304	2
11	DUST CAP	PCV	2
12	DRAIN PLUG 1/4″ NPT(M)	SS 316	1

2 Way Manifold – ‘ANGLE’ Type

Note :

1. Working Pressure 6000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	2
3	GLAND RETAINER	SS 316	2
4	GLAND SEAL	PTEF	4
5	CHECK NUT	SS 316	2
6	SPINDLE	SS 316	2
7	TRIM	SS 316	2
8	HANDLE	SS 304	2
9	WASHER	SS 304	2
10	LOCK PIN	SS 304	2
11	DUST CAP	PVC	2

2 Way Manifold – ‘F’ Type

Note :

1. Working Pressure 9000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	2
3	GLAND RETAINER	SS 316	2
4	GLAND SEAL	PTEF	4
5	CHECK NUT	SS 316	2
6	SPINDLE	SS 316	2
7	TRIM	SS 316	2
8	HANDLE	SS 304	2
9	WASHER	SS 304	2
10	LOCK PIN	SS 304	2
11	DUST CAP	PCV	2
12	DRAIN PLUG 1/4″ NPT(M)	SS 316	1

2 Way - Gauge Type (F) X (M)

Note :

1. Working Pressure 6000psig at room temp.
2. BOM applicable for SS316 body material
3. All dimensions are in mm unless specified

Bill Of Material :

PART NO	DESCRIPTION	MATERIAL	QTY
1	BODY	SS 316	1
2	GLAND BODY	SS 316	2
3	GLAND RETAINER	SS 316	2
4	GLAND SEAL	PTEF	4
5	CHECK NUT	SS 316	2
6	SPINDLE	SS 316	2
7	TRIM	SS 316	2
8	HANDLE	SS 304	2
9	WASHER	SS 304	2
10	LOCK PIN	SS 304	2
11	DUST CAP	PCV	2
12	DRAIN PLUG 1/4″ NPT(M)	SS 316	1

Ermeto Fittings

Visitor Counter