product-showcase
 

MANIFOLD VALVES

HPLOCK ranges of Valve Manifolds offer a safe and economical method of installation to control and measure pressure of liquids and gaseous media. They are ruggedly manufactured and precision machined to the most exacting dimensional tolerance to ensure perfect installation and application.

HPLOCK Valve Manifolds are functionally installed to control, measure, isolate, equalize, calibrate, drain, vent or differentiate the pressure of liquids and gases.

HPLOCK Valve Manifolds series offer 2, 3 and 5 valves configurations which come in remote mounting “R” Type (Pipe to Pipe), direct mounting “T” & “H” type (Pipe to Flange & Flange to Flange) onto the instrument on 2-1/8” (54mm) centre.

M.O.C : Carbon Steel, SS316, SS316-l, SS304,

Type : 2, 3, 5 Way

End Connections : NPT / BSP / BSPT / SW

Rating : Up to 9000 PSI

 
Materials Standards
 
The Valve Body can be supplied in different materials as outlined below.
 
 
Gland Packing Materials
 
PTFE is standard for all valves up to an opertaing temperature of 240C. PTFE is in the form of rings.Graphoil is recommend for operating temperature above 240C. Graphoil packing contains no resin binders, it is self lubricating at all temperatures.
 
Thread specification
 
 
A thread sealant or Teflon tape should always be used when assembling tapered threads.